Lowrance LBS-1 Broadband Sounder
Home >> Products >> Sonar >> Lowrance >> LBS-1
-
-
Is my unit compatible?
The EtherNet sharing facility is designed to work with the Lowrance 2007 and newer colour screen units. So that's GlobalMap chartplotters, LCX & LMS Combo sounder/chartplotters & X sounders (except X67c)
If you're not sure, look at the back of your unit and see if it has one of these "ENET" sockets 
-
Introducing the next generation of Lowrance fish-finding technology. This unique software-driven sonar optimizer produces peerless echo clarity and displays the most striking underwater definition ever achieved. It delivers digitally-purified marking/separation of fish, structure, thermoclines and bottom, while virtually eliminating surface and turbulent water clutter. It also extends sounding depths to thousands of feet without loss of bottom readings.
For use with single Lowrance unit with 5-pin ethernet connector (see image above), or networked with a wide choice of compatible Lowrance models, Lowrance Broadband Sounder technology is the new standard in ultimate sonar performance.
The Lowrance ethernet networking system enables high speed, easy-to-use, plug-and-play expansion of your marine networks. Simply connect to multiple head units and modules with the Navico Expansion Port-1, which allows the sharing of data for up to four head units or modules per Expansion Port-1.
Direct connect with compatible Lowrance head unit and transdcuer , or networkable with other head units with optional Navico Expansion Port -1
The beauty of the LBS-1 Broadband Sounder is the way it transforms a GlobalMap chartplotter into a full-functioning combination chartplotter/sounder. It converts:
- Lowrance GlobalMap 5200c to an LMS-520c/LMS-525cDF*
- Lowrance GlobalMap 5300c iGPS to an LMS-522c iGPS/LMS-527cDF iGPS*
- Lowrance GlobalMap 7200c to an LCX-27c
- Lowrance GlobalMap 8200c to an LCX-37c
- Lowrance GlobalMap 9200c to an LCX-112c
* depends on which transducer you purchase: 200kHz or 50/200kHz DF
Specs:
- Compatible with all 2007 and later LCX, LMS, X and GlobalMap® Lowrance models with 5-pin ethernet connector (2007 models require free software upgrade
- Connectivity between transducer and single head unit, or up to four compatible head units using optional Navico Expansion Port-1
- Single Broadband Sounder-1 module connects to any Lowrance transducer: Skimmer®, pod, shoot-thru and bolt-thru hull
- Automatic operation at any frequency selected: 50, 83 and 200 kHz
- Nominal output power 250W peak-to-peak / 31W RMS
- Analog output power equivalent 30,000W peak-to-peak / 3,750W RMS
- Tested sounding depths to 5,000' / 1525 m
- Spec : Dimensions : 8.3” / 210mm W x 2.3” / 57.6mm H x 7.4” / 188mm D
- Weighs : 1.82 lbs / 0.82 Kgs
- Waterfproof to IPX 7
- 9.5 – 32 vDC switched input power
- Temp Range : -4ºF / -20ºc to +176ºF / +80ºc
Comprises:
- LBS-1 broadband sounder module
- Unit Power Cable & Fuses
- 1 x 6ft Ethernet Cable
- User Manual
- Warranty : 2 years